Fisher-paykel CE365D Bedienungsanleitung PDF herunterladen (Seite 16)

Installation instructions

Fastening the cooktop to the counter

Turn the cooktop upside down and place it on a soft surface.

Spread the seal around the edges of the cooktop with the adhesive side facing down, as shown

in Figs. 6 and 7. Make sure that the whole perimeter is sealed. Cut off any excess material.

Mount the supplied clamps (A) and screws (B) onto the cooktop, as shown (without tightening

the screws).

Place the cooktop into the cutout, then tighten the screws to clamp the cooktop securely to the

counter.

Using a sharp cutter or trimmer knife, trim the excess sealing material around the edge of the

cooktop. Take care not to damage the countertop.

Note: if the countertop is thicker than 1

⁄” (40 mm), recess the underside to between

⁄” (30 mm) and 1 ⁄” (40 mm).

Fig. 6 Preparing the cooktop before installation

Fig. 7 Fastening the cooktop to the counter

Seal

Adhesive side

Clamp position

Fitting the clamps

/ " (30 mm) min.

1 / " (40 mm) max.

Seal

Clamp Screw

Seal

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 51 52

Keine Kommentare

Fisher-paykel CE365D Bedienungsanleitung Seite 16