Fisher-paykel DD24DT Bedienungsanleitung PDF herunterladen

DishDrawer®

Installation instructions

DD24DT models

US CA

Important!

SAVE THESE INSTRUCTIONS

The models shown in this document may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please go to our

website www.fisherpaykel.com or contact your local Fisher & Paykel dealer.

SAFETY AND WARNINGS

Important safety instructions!

Installation of this DishDrawer® requires basic mechanical and electrical skills.

Be sure to leave these Instructions with the Customer.

Installation must comply with your local building and electricity regulations.

At the completion of the DishDrawer® installation, the Installer must perform

Final Check List.

Remove all packaging materials supplied with the DishDrawer®.

This DishDrawer® is manufactured for indoor use only.

Ensure all water connections are turned OFF. It is the responsibility of the plumber and

electrician to ensure that each installation complies with all Codes and Regulations.

The DishDrawer® MUST be installed to allow for future removal from the enclosure if service is required.

The switched power outlet must be outside the DishDrawer® cavity so that it is accessible after

installation.

Care should be taken when the appliance is installed or removed to reduce the likelihood of damage to

the power supply cord.

If the DishDrawer® is to be relocated from one installation to another it must be kept upright to avoid

damage from water spillage.

Make sure only new hoses are used for connection (supplied with DishDrawer®). Old hoses should not

be reused.

Failure to install the DishDrawer® correctly could invalidate any warranty or liability claims.

If the product is installed in a motor vehicle, boat or similar mobile facility, you must bring the vehicle,

boat or mobile facility containing the product to the service shop at your expense or pay the service

technician’s travel to the location of the product.

WARNING!

Electrical hazard

Before installing the DishDrawer®, remove the house fuse or open the circuit

breaker.

If permanently connecting the DishDrawer®, be sure the power is isolated and

the DishDrawer® unplugged.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of a malfunction or breakdown,

grounding will reduce the risk of electric shock by providing a path of least

resistance for electric current. This appliance is equipped with a cord having

an equipment-grounding conductor and a grounding plug. The plug must be

plugged into an appropriate outlet that is installed and grounded in accordance

with all local codes and ordinances. WARNING - Improper connection of the

equipment-grounding conductor can result in a risk of electric shock. Check with

a qualified electrician or service representative if you are in doubt as to whether

the appliance is properly grounded.

If the DishDrawer is installed as a permanently connected appliance:

GROUNDING INSTRUCTIONS - This appliance must be connected to a grounded

metal, permanent wiring system, or an equipment-groounding conductor must

be run with the circuit conductors and connected to the equipment-grounding

terminal or lead on the appliance.

Do not modify the power supply plug provided with the appliance - if it will not

fit the outlet, have a proper outlet installed by a qualified electrician. Do not use

an extension cord, adapter plug or multiple outlet box.

Failure to follow this advice may result in electrical shock or death.

WARNING!

Cut hazard

Take care - panel edges are sharp.

Failure to use caution could result in injury or cuts.

(1,1) -1- 599632C DD24D TALL installA2 USCA.indd 15/4/09 11:50:45 AM

1 2 3 4 5 6 7 8 9

Inhaltsverzeichnis

Seite 1 - SAFETY AND WARNINGS

DishDrawer®Installation instructionsDD24DT models US CAImportant! SAVE THESE INSTRUCTIONSThe models shown in this document may not be available in

Seite 2 - (inches (mm))

Product dimensions (inches (mm))Pre nishedLCD DD24DTPre nishedFlat doorDD24DT IntegratedDD24DTAoverall height* of product34 - 36 ⁄” (863.5- 923.

Seite 3 - Important!

2” x 4”PARTS SUPPLIEDClamp (1)Wire clip (2)Phillips 16 mm screws (9)Drain hose support (1)Moisture protection tape (1)(to prevent moisture damage) Dra

Seite 4

30 mm3214567788131714151516912111110AEnsure the drawer is removed and then rotated counter-clockwise to prevent kinked hoses.Before refitting the draw

Seite 5 - ROUTE THE HOSES

12ROUTE THE HOSES7ORTie together to avoid kinking.(1,1) -2- 599632C DD24D TALL installA2 USCA.indd 15/4/09 11:51:16 AM(1,1) -2- 599632C DD24D TALL i

Seite 6 - ATTACH SIDE MOUNTING BRACKETS

21133optional(x2)30 mm1234555 ” (150 mm)21133optionaloptional (x2)If top mounting brackets are being used, ensure they’re securely fitted before slid

Seite 7 - REFIT THE DRAWER

OPTIONAL12344 optionalmax. ¾ ” (19 mm)4351919912867214543x 4123ACCBBA 1Ensure product is level and aligning with cabinetry. Using the most appropriat

Seite 8 - PLUMBING AND DRAINAGE OPTIONS

29 ½” - 34 ¾”(750 - 882.5 mm) 1 ½” (38 mm)1max. 4 ¾”(120 mm)216547229 ½” - 34 ¾”(750 - 882.5 mm)1365456545AIf space is limited for fixing, push hos

Seite 9 - TROUBLESHOOTING

Check all parts are installed.Ensure product is level, securely fastened to the cabinetry and opens and closes freely. The DishDrawer® must be free to

Kommentare zu diesen Handbüchern

Keine Kommentare

Fisher-paykel DD24DT Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Geschirrspüler Fisher-paykel DD24DT herunter. Fisher & Paykel DD24DT User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Geschirrspüler Fisher-paykel DD24DT